17

JX 5,000 lb Center Mount Drill Jack

$139.00; $139.00
Unit price: per

The Trailer Valet JX 5K Center is a powerful, dual-operation jack designed for maximum efficiency. With a 5,000 lb static capacity and lift capabilities of 1,600 lbs (manual) or 800 lbs (with a 20-24V drill and included Drill Attachment), it saves you time and effort. Its patented gear technology enhances performance while reducing heat, and the weather-resistant shield with black powder coating ensures durability. Upgrade your trailer jack—move forward with ease and power!

Free Delivery

Buy Now, Pay Later

3-Year Warranty

Top Features

The Trailer Valet JX 5K Center is a manual hand-crank jack that can also be powered by any 20–24V compact drill using the Trailer Valet Drill Attachment.

It offers a 5,000 lb static capacity, lifts 1,600 lbs by hand or 800 lbs by drill, and uses patented gears for efficient operation with reduced heat buildup.

The JX 5K Center comes with weather-resistant shield protection, and is topped with our signature wrinkle black powder coating so that you can go further, longer.

The JX series includes Warning and Stop indicators to prevent over-extension, plus a foot plate and drill attachment. JX Wheel attachment sold separately.

Shop JX5-C

TECH SPECS

Specifications
SKU: TVJX5-C

Static Tongue Weight: 5,000 lbs

Dynamic Lift Capacity: 1,600 lbs

Lift Capacity w/ Drill: 800 lbs

Mounting Type: Center

Item Net Weight: 15 lbs

Includes: Jack, drill attachment, footplate, and hand crank.

Dimensions

Item Height: 23 inches

Item Width: 7.4 inches

Item Depth: 6.5 inches

FAQ

HAVE A QUESTION?

You know how they say there's no such thing as a dumb question? Well, they were wrong, but here are some common not-so-dumb ones. Still flummoxed? Contact our customer support.

Contact Us

How do you recommend propping up the trailer for installation?

A few suggestions we have for propping up your trailer are using your existing jack, a stabilizer block, jack stands, or wood blocks. You will need at least 16-18” of height to properly install the JX.

Can the center jack (JXC) be welded rather than bolted?

Yes, at your discretion. But note it will void any warranty and return.

Do I need to grease the gears before use?

No, the JX will come already lubricated. We recommend greasing the internal gear system every 90 days. Please refer to the product manual.

What is the load capacity of the JX?

JX2-C & JX2-S: 1,200 lb standard lift, 600 lb lift with power drill, and 2,000 lb static capacity. JX5-C & JX5-S: 1,600 lb standard lift, 800 lb lift with power drill, and 5,000 lb static capacity.

Can I use a drill with the JX? What type is recommended?

Yes. Any 20V–24V compact non-impact drill can be used with the Trailer Valet Drill Attachment. Keep the torque as low as possible while still lifting, heavier loads will require higher torque.

Does the JX come with installation hardware and mounting brackets?

Yes. All JX Center jacks include three bolts and lock washers for installation. The JX2-S includes a spring-loaded swivel bracket, while the JX5-S features a pipe mount swivel bracket with stow pin. Both require at least 8 inches of clearance for installation.

What is the best position for installing the JX5-S mount bracket?

The low position is recommended for optimal performance, but it can be flipped to a high position if needed.

Can the JX be stored outdoors or exposed to water?

Yes. The JX features three layers of weather protection and can be stored outdoors. It can be submerged briefly, but we recommend rinsing it with fresh water after heavy saltwater exposure.

How do I know when the jack is fully extended or retracted?

The JX includes clearly marked warning and stop indicators on the inner tube to prevent over-extension and protect the internal gear system.

How much does the JX weigh?

JX2-S: 23 lbs JX5-S: 25 lbs JX2-C: 14 lbs JX5-C: 14 lbs