18
Mount refurbished JX 5K jack for smooth trailer support and precise side installation - REFTVJX5-S
View JX 5K refurbished jack in outdoor lifestyle setting with side mount bracket - REFTVJX5-S
Showcase JX 5K side mount jack connected to trailer frame in practical use - REFTVJX5-S
Front dimension diagram of JX 5K side mount trailer jack - REFTVJX5-S
Side profile schematic showing dimensions of JX 5K side jack - REFTVJX5-S
JXMB-JX5S mounting bracket side illustration - TVJX5-S
JXMB-JX5S back view mounting bracket illustration - TVJX5-S
Top view diagram of JXMB-JX5S mounting bracket - TVJX5-S
Mount refurbished JX 5K jack for smooth trailer support and precise side installation - REFTVJX5-S
View JX 5K refurbished jack in outdoor lifestyle setting with side mount bracket - REFTVJX5-S
Showcase JX 5K side mount jack connected to trailer frame in practical use - REFTVJX5-S
Front dimension diagram of JX 5K side mount trailer jack - REFTVJX5-S
Side profile schematic showing dimensions of JX 5K side jack - REFTVJX5-S
JXMB-JX5S mounting bracket side illustration - TVJX5-S
JXMB-JX5S back view mounting bracket illustration - TVJX5-S
Top view diagram of JXMB-JX5S mounting bracket - TVJX5-S

Certified Refurbished Trailer Valet JX 5K Side-Mount Drill Jack

$127.00
$127.00

The Trailer Valet JX 5K Side is a heavy-duty, versatile manual jack designed to make trailer lifting effortless. With a 5,000 lb static capacity and lift capabilities of 1,600 lbs (manual) or 800 lbs (with a 20-24V drill and included Drill Attachment), it offers power and convenience. Patented gear technology ensures efficiency while minimizing heat, and the protective sleeve provides smooth operation. Built tough with weather-resistant materials and a black powder coating—move forward with ease!


Please note that every certified refurbished unit is a final sale.
Description

The Trailer Valet JX 5K Side is a manual hand-crank jack that has the versatility and capability to be powered by any 20-24V compact drill with the Trailer Valet Drill Attachment.

It has a static capacity of 5,000 lbs and a lift capacity of 1,600 lbs with the hand crank and 800 lbs lift capacity with the drill. Its patented gear material composition delivers maximum efficiency while reducing heat retention.

We've built in a sleeve fitting to offer the ultimate protection while ensuring a smooth glide every time. The JX 5K Side comes with a pipe mount bracket, weather resistant shield protection, and is topped with our signature wrinkle black powder coating so that you can go further, longer.

It’s time to MOVE FORWARD and replace the standard jack on your trailer! Power it up and save time, effort, and hassle and get to what you love most. Comes standard with foot plate and Trailer Valet Drill Attachment. JX Wheel attachment sold separately.

If you have any inquiries about if this product will work for your specific trailer or environment, please reach out to our Support Team at support@trailervalet.com


All our units are certified refurbished by trained Trailer Valet technicians, ensuring each product meets high standards for performance and reliability. Each unit undergoes thorough testing and reconditioning to ensure it is functionally identical to a new model. Plus, you'll receive a 1-year limited warranty with your purchase.

Please note that every certified refurbished unit is a final sale. By choosing refurbished, you are supporting our environmental commitment to extend the life of quality components and minimize waste. Thank you for helping us maximize the use of our materials.

If you have any questions, please contact us at support@trailervalet.com or call 844-846-9344. We’re always happy to help!

Features & Specs

Features

  • Includes Trailer Valet Drill Attachment (TVDA), footplate, and hand crank
  • Zinc-rich coating, nickel plating, and finished with our signature wrinkle black powder coating
  • Patented Trailer Valet Gear System (12:16 Ratio)
  • Patented gear material composition delivers maximum efficiency while reducing heat retention
  • Weather resistant shield protection and a protective sleeve to ensure a smooth glide every time
  • Manual hand-crank jack that has the versatility and capability to be powered by any 20-24V compact drill with the Trailer Valet Drill Attachment
  • Pull-pin swivel mount for easy stow
  • Compatible with JX Jack Wheel Attachment (TVJXMW), sold separately
  • Retracted height: 23in, Extended height: 37in, Total travel: 14in
  • Static Capacity (with footplate): 5,000 lbs Static Capacity (with wheel): 1,200 lbs Lift Capacity: 1,600 lbs Lift Capacity w/ Drill: 800 lbs
  • Outer tube diameter: 57mm, Inner tube diameter: 51mm
  • Clearance (from bottom of bracket to top of jack): Approximately 14in, center of mount point to top of jack is 11.5in
  • Total Trailer Lift: 11.5in to 25.5in
  • Max Frame Size Fit: 4.75 in high, 3.75 in deep
  • Use your own bolt for deeper frames - Uses M10 1.5
  • Installation: Requires 8 in of clearance
  • For frames from 4.75 inches to 5.75 inches use the mounting bracket option TVJLMB Sold Separately

Specifications

  • Dynamic Lift Capacity Lbs: 1600
  • Static Tongue Weight lbs: 5000
  • Static Weight Capacity with Footplate Lbs: 5000
  • Mounting Type: Side
  • Item Height Inches: 23
  • Item Width Inches: 6
  • Item Depth Inches: 9
  • Item Net Weight lbs: 24
  • Warranty: 1 Year Manufacturers Limited Warranty
  • Includes: Includes Jack, Drill attachment, footplate, and hand crank
FAQ

How do you recommend propping up the trailer for installation?

A few suggestions we have for propping up your trailer are using your existing jack, a stabilizer block, jack stands, or wood blocks. You will need at least 16-18” of height to properly install the JX.

Can the center jack (JXC) be welded rather than bolted?

Yes, at your discretion. But note it will void any warranty and return.

Do I need to grease the gears before use?

No, the JX will come already lubricated. We recommend greasing the internal gear system every 90 days. Please refer to the product manual.

What is the load capacity of the JX?

JX2-C & JX2-S: 1,200 lb standard lift, 600 lb lift with power drill, and 2,000 lb static capacity. JX5-C & JX5-S: 1,600 lb standard lift, 800 lb lift with power drill, and 5,000 lb static capacity.

What is the recommended drill torque setting?

We recommend keeping the torque setting as low as possible while still lifting the trailer. A heavier load will require a higher torque setting.

Does the JX come with a caster wheel?

Each JX comes standard with a foot plate. Jack Wheels are available as an option (TVJXMW)

Does the JX Center Mount come with bolts for installation?

Yes. All JX Center jacks come with three bolts and lock washers for installation to your trailer frame.

What type of Mount Bracket comes with the JX2-S and JX5-S?

The JX2-S comes with a spring loaded pull pin swivel bracket for a Max Frame Size Fit: 4.75 in high, 3.75 in deep . The JX5-S comes with a same size pipe mount swivel bracket and stow pin. (Only the JX5-S can also use the TVJLMB (Sold Seperately) for frames from 4.75 inches to 5.75 inches) Note: both jacks need at least 8” of clearance to install.

What is the best position for the JX5-S Mount Bracket to be installed?

The connection point should be in the low position (recommended). However, it can be flipped to the high position if needed.

How much does the JX weigh?

JX2-S: 23 lbs JX5-S: 25 lbs JX2-C: 14 lbs JX5-C: 14 lbs

Can the JX be submerged in water?

The JX can be submerged in water for brief periods. However, we highly recommend rinsing the JX with fresh water after heavy salt water exposure.

Can the JX be stored outdoors?

Yes, the JX has three layers of weather protection and can be stored outdoors with your trailer.

What kind of drill should I use with the JX?

Any 20V-24V compact non-impact drill can be used with the Trailer Valet Drill Attachment.
Videos

JX Series Circular Mount | Difference Between Static Weight and Dynamic Weight Capacity

How to Grease the JX Series and Repair the Nozzle

How to Replace / Repair the JX Series Gears and Avoid Overextending It

How To Replace The Trailer Valet JX Inner Tube

Deep Dive on the NEW Trailer Valet JX Series - Drill Powered Jacks

How to Install the JX Drill Powered Jack Series

How the JX Series Jacks are different from other trailer jacks on the market

JX SERIES UNBOXING | Unboxing all 4 NEW Trailer Valet JX Drill Powered Jacks

First Look at the NEW Trailer Valet JX Series, Drill-Powered Tongue Jacks

Manuals
TVJX5-S And TVJX5S-MW Operating Manual
Download

TVJX5-S And TVJX5S-MW Quickstart Guide
Download

Related Products

Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00
Example product title
$127.00
$127.00

Overall rating: 4.9473686 / 5 from 19 reviews.

AI Generated Review Summary

Summary topics

Review topics: [installation, customer service, shipping, jack].

Review highlights

Reviews

Having the option to use

"Having the option to use a drill to crank the jack is great."

— Randy F. (5/5)

This trailer jack is heavy

"This trailer jack is heavy duty and easy to install. My boat weighs about 2000 lbs. It's very easy to raise and lower the trailer tongue with the hand crank."

— Michael P. (5/5)

Haven't had the chance to

"Haven't had the chance to install it yet but I have assembled it. I've got to say this is the sturdiest trailer tongue jack I have ever seen. Well constructed and solid. Looking forward to installing it and using it"

— David L. (5/5)

Great product! I wish I

"Great product! I wish I had ordered sooner!"

— Ken R. (5/5)

Great construction.

"I have not installed it yet. It feels well constructed. Functions as it should. I am looking forward to installing it. I really enjoyed the customer service. They were helpful as I have a trailer with a thicker frame and I needed help finding the right fit."

— Matt P. (5/5)

Great customer service

"There was a mix up on my order and the first delivery was incorrect. Customer service fixed it the same day I emailed and shipped the correct item right away. They are polite and professional. I will do business again because of my experience. Thanks Lucas."

— Paul B. (5/5)

Just like new

"While this was a refurb unit, I couldn’t tell it wasn’t new. Great buy."

— John S. (5/5)

back saver

"I use this for 18' enclosed trailer that is pretty loaded up and it works great! just need to make sure you have a good strong drill... I use 20v dewalt."

— Kevin F. (5/5)

Easy install , smooth operation

"Easy install , smooth operation , strong enough lifted front tires of trailer off the ground with 6000lb boat on trailer"

— Donald D. (5/5)

Best jack yet

"This is a great jack, and cranks easily."

— Patrick N. (5/5)

Q&A

What is the minimum clearance height when mounted and rotated vertically (jacking position) via a bracket on a standard single tongue (3x3� square) trailer?
Hello! Thank you for reaching out, you will need at least 18" of clearance when mounted to your trailer frame. Please feel free to reach out to support@trailervalet.com if you have any questions, thank you!
Listing pictures shows a mount that goes to Trailer. Other Pictures once I open up do not show it does the mount that bolts to the trailer come with
Hello! When purchasing one of our JX Jacks you will receive everything you need to install it out of the box. The jack will come with bolts, foot plate, hand crank, drill bit attachment, and the rotation pin. Please feel free to reach out to support@trailervalet.com if you have any questions, thank you!
{"loading" => "lazy", "sizes" => nil, "widths" => "165, 360, 535, 750, 1070, 1500"}

Free Shipping

Enjoy free shipping on any order $200 and over to anywhere in the contiguous US.

{"loading" => "lazy", "sizes" => nil, "widths" => "165, 360, 535, 750, 1070, 1500"}

Buy Now, Pay Later

Flexible payment options with Shop Pay and Affirm—get what you need now and pay over time, hassle-free.

{"loading" => "lazy", "sizes" => nil, "widths" => "165, 360, 535, 750, 1070, 1500"}

Warranty

All products are covered under our limited 1-year warranty. Extended 2-Year and 3-Year warranties are available for extra peace of mind.

Trending Now

5X - 5,000 lbs Mover
$599.00
$599.00
JX 5,000 lb Side Mount Drill Jack
From $189.00
From $189.00
MV Pro - 12,000 lbs Mover
$1,199.00
$1,199.00
JX 2,000 lb Side Mount Drill Jack
From $199.00
From $199.00
RVR5 5,500 lb Remote Mover
$4,499.00
$4,499.00
RVR3 3,500 lb Remote Mover
From $2,999.00
From $2,999.00