Best RV Jacks
There are a lot of RV accessories on the market, but an RV jack is one of the most important ones to consider because it helps you hitch your trailer and keeps it stable when you are parked. Although several RVs now come with built-in jacks, many older RVs don’t have a jack so getting one is important because it adds to the safety of the trip. Described below are the many types and their benefits and downsides, as well as the advantages and disadvantages of each.
A jack for an RV is an essential piece of equipment. They're also known as stabilizers that help stabilize your RV. When your rig is not in motion, a jack is utilized to steady it. Stabilizers are designed to support and stabilize your RV when it is parked and offer a more stable walking surface for you and any other people inside. RV jacks are available for both the frame and the slide-outs of your RV. Because many must be removed before you can leave camp, these jacks are frequently portable and small.
Depending on the manufacturer, landing gear stabilizers may sustain up to 10,000 pounds. These machines are simple to operate and can be either manual or electric.
They must be permanently installed on your setup, which might be a pain if you're doing it alone at home. These sorts of jacks are standard on most contemporary RVs and are already fitted by the manufacturer.
Leveling scissor jacks are more expensive than others because of the amount of weight they can support and their permanent installation.
Tripod jack stands, one of the most cost-effective types of RV jack stands, are exactly what they sound like. Because of their triangle design, they are set up on three legs, ensuring that your setup will be stable.
Tripod jacks aren't usually designed to hold more than 500 pounds per jack. They require a pad or other flat support from underneath so that the slender legs don't sink into the soft ground if you go off the beaten path.
If you don't have a particularly hefty RV, these inexpensive and simple-to-use tripod jacks are a good choice.
If you're concerned about the levelness of your setup, a leveling system may be the right choice for you. You may already have an integrated leveling system if you have a newer, more sophisticated rig. These systems are meant to electronically adjust your RV till it is level and may be purchased aftermarket.
This system is quite simple to operate and set up, and the weight restrictions are usually in the thousands. This type of RV stabilizer, on the other hand, isn't designed to lift your RV extremely high; rather, it's designed to provide basic support. Plus, they may be rather costly!
Electric stabilizers come in a variety of designs, similar to landing gear stabilizers, which are both automated and electric. These tiny fellas may be a lot of fun and are usually portable. All you need to do is install them on your rig properly, and their electronics will elevate and steady your equipment without you lifting a finger. The biggest disadvantage of this type of RV jack is the cost. These could be the stabilizer for you if you're seeking convenience and aren't bothered about expenses.
Pipe-mounted stabilizers are one of the most prevalent types of stabilizers, and they may be a wonderful "one size virtually fits all" design. These guys are available in a range of weight capacities, as well as portable and permanent options.
Their cost is reasonable, and a single jack can support up to 7,000 pounds. They are almost always manual and can be difficult to set up properly so you might want to consider hiring a professional to do this for you.
The Trailer Valet JX 5K Center is a hand-cranked manual jack that can be operated by any 18-24V drill using the Trailer Valet Drill Attachment. It features a 5,000-pound lift capacity, and its unique gear material composition maximizes efficiency while lowering heat retention.
This jack comes with a built-in sleeve that provides maximum protection while maintaining a smooth glide every time. The JX 5K Side is equipped with a pipe mount bracket, weather resistant shield protection, and wrinkle black powder coating to help you travel further and endure longer.
It comes with a foot plate and a Trailer Valet Drill Attachment as standard.
Simple is sometimes best, and these EAZ-LIFT jacks could be just what you need. They may be the whole deal for you and your gear since they are sturdy, portable, and adaptable.
The Eaz-Lift Telescopic RV Jack is a convenient and safe method to secure your RV. It has a zinc-plated inner tube, a fast-release pin, and a screw assembly, and it adjusts from 16 to 30 inches in length. The jack has a verified 6,000 lb load capability per jack, thanks to its robust steel structure and powder coat for optimal corrosion protection. Getting at least 2 of these is a must for an RV.
The Camco Olympian Aluminum Jacks are adjustable from 11 inches to 17 inches in height and are made of long-lasting cast aluminum. Each jack has a capacity of up to 6,000 pounds and can accommodate a range of heights. Simply set each stack jack below your RV, then elevate it to the right height to provide adequate leveling and stability. Stack jacks are simple to use and easy to install. In addition to that, they are not heavy and are inexpensive. Since each of these jacks can hold up to 6,000 pounds you’ll need at least two to level your RV perfectly.
This Lippert Components power stabilizer jack system has a convenient remote that automatically stabilizes your rig. This bar is permanently mounted beneath your equipment and can handle all of your leveling needs. When it comes to durability, this power stabilizer is designed with thick gauge steel, embossed legs, and a powder-coat finish to survive the weather and function efficiently day after day.
Each stabilizer leg works independently, autonomously adjusting to uneven, tough surfaces until the RV is safely held in place. Most RVs and trailers on the market today are compatible with these PSX1 Power Stabilizers.
The Dumble RV Slide Out stabilizer jack is mainly used for your RV slide-outs. Long-term usage of your camper slide-out can cause sagging and bending in the slide-out rails, resulting in operating concerns and costly frame repairs. In your travel trailer, RV, or camper slide-out rooms, this two-pack may relieve stress and boost stability.
These rust-resistant RV levelers are made of heavy-duty steel with a zinc coating for optimum strength and durability. The Dumble set of RV slide-out supports includes height-adjustable RV slide-out camper stabilizer jacks that range from 26 to 49 inches.
Stabilizing your rig is essential for your safety and comfort when you are camped out, whether it’s in a luxury camping ground or boondocking in a secluded place. Our objective in providing the RV jacks shown above is to help you find the perfect jack for your needs so that you may enjoy your time on the road to the fullest.
What Is An RV Jack?
A jack for an RV is an essential piece of equipment. They're also known as stabilizers that help stabilize your RV. When your rig is not in motion, a jack is utilized to steady it. Stabilizers are designed to support and stabilize your RV when it is parked and offer a more stable walking surface for you and any other people inside. RV jacks are available for both the frame and the slide-outs of your RV. Because many must be removed before you can leave camp, these jacks are frequently portable and small.
Types Of RV Jacks
Leveling Scissor Jacks
Depending on the manufacturer, landing gear stabilizers may sustain up to 10,000 pounds. These machines are simple to operate and can be either manual or electric.
They must be permanently installed on your setup, which might be a pain if you're doing it alone at home. These sorts of jacks are standard on most contemporary RVs and are already fitted by the manufacturer.
Leveling scissor jacks are more expensive than others because of the amount of weight they can support and their permanent installation.
Tripod Jacks
Tripod jack stands, one of the most cost-effective types of RV jack stands, are exactly what they sound like. Because of their triangle design, they are set up on three legs, ensuring that your setup will be stable.
Tripod jacks aren't usually designed to hold more than 500 pounds per jack. They require a pad or other flat support from underneath so that the slender legs don't sink into the soft ground if you go off the beaten path.
If you don't have a particularly hefty RV, these inexpensive and simple-to-use tripod jacks are a good choice.
Leveling Systems
If you're concerned about the levelness of your setup, a leveling system may be the right choice for you. You may already have an integrated leveling system if you have a newer, more sophisticated rig. These systems are meant to electronically adjust your RV till it is level and may be purchased aftermarket.
This system is quite simple to operate and set up, and the weight restrictions are usually in the thousands. This type of RV stabilizer, on the other hand, isn't designed to lift your RV extremely high; rather, it's designed to provide basic support. Plus, they may be rather costly!
Electric Stabilizers
Electric stabilizers come in a variety of designs, similar to landing gear stabilizers, which are both automated and electric. These tiny fellas may be a lot of fun and are usually portable. All you need to do is install them on your rig properly, and their electronics will elevate and steady your equipment without you lifting a finger. The biggest disadvantage of this type of RV jack is the cost. These could be the stabilizer for you if you're seeking convenience and aren't bothered about expenses.
Pipe-Mounted Stabilizers
Pipe-mounted stabilizers are one of the most prevalent types of stabilizers, and they may be a wonderful "one size virtually fits all" design. These guys are available in a range of weight capacities, as well as portable and permanent options.
Their cost is reasonable, and a single jack can support up to 7,000 pounds. They are almost always manual and can be difficult to set up properly so you might want to consider hiring a professional to do this for you.
5 Best Jacks For an RV
Trailer Valet JX 5K Center
The Trailer Valet JX 5K Center is a hand-cranked manual jack that can be operated by any 18-24V drill using the Trailer Valet Drill Attachment. It features a 5,000-pound lift capacity, and its unique gear material composition maximizes efficiency while lowering heat retention.
This jack comes with a built-in sleeve that provides maximum protection while maintaining a smooth glide every time. The JX 5K Side is equipped with a pipe mount bracket, weather resistant shield protection, and wrinkle black powder coating to help you travel further and endure longer.
It comes with a foot plate and a Trailer Valet Drill Attachment as standard.
EAZ LIFT 4860 Jack
Simple is sometimes best, and these EAZ-LIFT jacks could be just what you need. They may be the whole deal for you and your gear since they are sturdy, portable, and adaptable.
The Eaz-Lift Telescopic RV Jack is a convenient and safe method to secure your RV. It has a zinc-plated inner tube, a fast-release pin, and a screw assembly, and it adjusts from 16 to 30 inches in length. The jack has a verified 6,000 lb load capability per jack, thanks to its robust steel structure and powder coat for optimal corrosion protection. Getting at least 2 of these is a must for an RV.
Camco Olympian Aluminum Jack
The Camco Olympian Aluminum Jacks are adjustable from 11 inches to 17 inches in height and are made of long-lasting cast aluminum. Each jack has a capacity of up to 6,000 pounds and can accommodate a range of heights. Simply set each stack jack below your RV, then elevate it to the right height to provide adequate leveling and stability. Stack jacks are simple to use and easy to install. In addition to that, they are not heavy and are inexpensive. Since each of these jacks can hold up to 6,000 pounds you’ll need at least two to level your RV perfectly.
Lippert Components High-Speed Power Jack
This Lippert Components power stabilizer jack system has a convenient remote that automatically stabilizes your rig. This bar is permanently mounted beneath your equipment and can handle all of your leveling needs. When it comes to durability, this power stabilizer is designed with thick gauge steel, embossed legs, and a powder-coat finish to survive the weather and function efficiently day after day.
Each stabilizer leg works independently, autonomously adjusting to uneven, tough surfaces until the RV is safely held in place. Most RVs and trailers on the market today are compatible with these PSX1 Power Stabilizers.
Dumble RV Slide Out Stabilizer Jack
The Dumble RV Slide Out stabilizer jack is mainly used for your RV slide-outs. Long-term usage of your camper slide-out can cause sagging and bending in the slide-out rails, resulting in operating concerns and costly frame repairs. In your travel trailer, RV, or camper slide-out rooms, this two-pack may relieve stress and boost stability.
These rust-resistant RV levelers are made of heavy-duty steel with a zinc coating for optimum strength and durability. The Dumble set of RV slide-out supports includes height-adjustable RV slide-out camper stabilizer jacks that range from 26 to 49 inches.
Stabilizing your rig is essential for your safety and comfort when you are camped out, whether it’s in a luxury camping ground or boondocking in a secluded place. Our objective in providing the RV jacks shown above is to help you find the perfect jack for your needs so that you may enjoy your time on the road to the fullest.
