Trailer Valet JX 2K Center

Note: All Trailer Valet JX Center Mount units produced after 6/1/2021 will include an upgraded 3-position circular mount plate in lieu of a standard triangular plate. Please contact us at support@trailervalet.com with any questions or concerns.

A few suggestions we have for propping up your trailer are using your existing jack, a stabilizer block, jack stands, or wood blocks. You will need at least 16-18” of height to properly install the JX. Yes, at your discretion. No, the JX will come already lubricated. We recommend greasing the internal gear system every 90 days. Please refer to the product manual. JXC (Center Mount Jacks): 3K lift capacity and 5K static capacity JXS (Side Mount Jacks): 2K lift capacity and 2K static capacity We recommend keeping the torque setting as low as possible while still lifting the trailer. A heavier load will require a higher torque setting. Each JX comes standard with a foot plate. Caster wheels will be released mid-December and will be sold separately. Yes. All JX Center jacks come with three bolts and lock washers for installation to your trailer frame. The JX2-S comes with a smaller bracket that can be mounted on a 4” frame and needs 6” of clearance to install. The JX5-S comes with a larger bracket that can be mounted on a 7” frame and needs at least 8” of clearance to install. The connection point should be in the low position (recommended). However, it can be flipped to the high position if needed. JX2-S: 23 lbs JX5-S: 25 lbs JX2-C: 14 lbs JX5-C: 14 lbs The JX can be submerged in water for brief periods. However, we highly recommend rinsing the JX with fresh water after heavy salt water exposure. Yes, the JX has three layers of weather protection and can be stored outdoors with your trailer. Any 18-24V compact non-impact drill can be used with the Trailer Valet Drill Attachment. We recommend the DeWalt brand.